Allen Bradley VFD 22BD024N104 AB PowerFlex 40 3 Phase Empower Laptop

Powerflex 40 Parameters. Powerflex 40 Manual Parameters Protective Features Motor Protection: I2t overload protection - 150% for 60 Secs, 200% for 3 Secs (Provides Class 10 protection) Overcurrent: 200% hardware limit, 300% instantaneous fault As an alternative, programming can also be performed using DriveExplorer™ or DriveExecutive™ software, a personal computer and a serial converter module

Parameter Details Reference P036 [Start Source] Set to 5 "RS485 (DSI) Port" if Start is controlled from Page 3-10 the network. Chapter Programming and Parameters Chapter 3 provides a complete listing and description of the PowerFlex 40 parameters

Buy PowerFlex 40 AllenBradley PowerFlex 40 AC Drive/ AC Inverter

Parameters are programmed (viewed/edited) using the integral keypad Aotewell Ltd www.aotewell.com Industry Automation RS485 (DSI) Protocol Parameter Configuration The following PowerFlex 40 parameters are used to configure the drive to operate on a network Programming and Parameters 3-5 PowerFlex 40 Adjustable Frequency AC Drive FRN 1.xx - 6.xx User Manual Publication 22B-UM001G-EN-E Display Group (continued) d012 [Control Source] Related Parameter(s): P036, P038, A051-A054 Displays the active source of the Start Command and Speed Command which are normally defined

PowerFlex 40 AC Drive, 600VAC, 3PH, 3.0 Amps, ,Frame Size B, IP20 (Open. The PowerFlex 40 is designed so that start up is simple and efficient Parameter Details Reference P036 [Start Source] Set to 5 "RS485 (DSI) Port" if Start is controlled from Page 3-10 the network.

Powerflex 40 Allen Bradley Manual. 3-40 Programming and Parameters Advanced Program Group (continued) A126 [Motor NP FLA] Related Parameter(s): A127 Set to the motor nameplate rated full load amps. For detailed PowerFlex 40 information including EMC instructions, application considerations and related precautions, refer to the PowerFlex 40 User Manual, Publication 22B-UM001