Embedded Systems Design Serial ATA (SATA) interface Part 1

Primary Master Pata Hard Disk. SATA AND PATA to USB converter 2.0 by Tech Technical Gyan (TTG) YouTube If you are using SCSI interface it will use SD word Primary master and slave, and secondary master and slave

With 2 CDs, you're talking *6* devices - you're on your own with that To support secure authentication, you must configure the administrator account (root) and at least ----- regular user account(s)

pata hard drive

You should see "Master" pop up next to the hard drive's name. That is because PATA only transfers data in mb/s, while the SATA interface allows you to transfer. At least by the 1990s, hard drive controllers were typically being built into the PATA drives, so the slave drives would be obeying commands sent by the master drive's "HDD controller" circuitry

Maxtor 500GB 3.5" PATA Hard Drive 7200rpm L01Y500 B&H. That is because PATA only transfers data in mb/s, while the SATA interface allows you to transfer. ATA-1 is a type of PATA based on a subset of the standard 96-pin connecter, and it utilizes either 40 or 44-pin connectors and cables.

KingSpec 2.5" PATA IDE 44pin 128GB SSD MLC Solid State Disk Hard Drive. For example if you are using IDE hard disk or CDROM it is will use HD word A typical home pc or laptop has 2 or 4 IDE channels as follows: ide0 = primary ; ide1 = secondary ; ide2 = tertiary; ide3 = quaternary; For example: ide0 = primary master = hda; ide1 = primary slave = hdb